Swift / Cultus / Gti 1989 0n

The Gti is probably one of a biggest cult cars in the world and lets face it after you drive one you can understand why.

Spring Kit

A$ 350.00

Lower your Swift and feel and see the difference it makes, made from BHP Steel these progressive rate springs will lower your GTi 50mm .
Comes as a set of 4 Springs with installation instructions.
These will work with standard length shockies.

Spring & Shock Kit

A$ 1,250.00

KONI Shockies and Lowered Progressive Rate Springs. This kit will change the feel of your Gti forever , the ride is something you have got to experience. Kit consists of 4 Adjustable Koni Sport Shockies and 4 Progressive Rate Springs.

Camber Kit

A$ 110.00

Get your swift to handle better by adjusting the camber on the front of your car , this is the only way to ensure the correct driving setup.
Kit contains 1 car set (front)

Sway Bar Front

A$ 195.00

Heavy duty front sway bar comes complete with all hardware and fitting instructions

Sway Bar Rear

A$ 185.00

Heavy duty 20mm rear sway bar comes complete with all hardware and fitting instructions

Strut Brace Front

A$ 225.00

Top quality strut brace ,fully adjustable, comes with all hardware and fitting instructions

Clutch Kit HD

A$ 250.00

This clutch is a Japanese made to be as heavy as possible in this application , but because of the cable operation it is also made with a light operating diaphram.
This unit is race proven and we believe it is much better than the standard unit. Kit includes PressurePlate, Clutch Plate and Thrust Bearing

Turbo Clutch Kit

A$ 350.00

This clutch kit is for extreme load , still gives the same light pedal and is a NEW race tested item.
The kit includes , pressure plate , clutch plate and throwout bearing.

Oil Cooler Kit

A$ 250.00

Beat the heat and prolong the life of your engine with a Oil Cooler . Temperatures can saw to extreme levels causing your engine oil to loose its viscosity , then the wear begins. Every Race Car has one !!!!
Kit includes Oil Cooler , Oil Filter Adaptor , hose , clamps, instructions, etc.

Headers / Extractors

A$ 295.00

Race proven , these extractors are mandrel bent and flow better than any other product we have tested.
(Photo not correct for application)

Unifilter Rampod

A$ 195.00

Spun Alloy construction with reuseable air filter , this is the cheapest HP you can buy , bolts straight up to the Airflow Meter Units and comes complete with all hardware, fitting instructions and cleaning instructions, get you GTi flowing with this great product.
GTI ONLY!!

Turbo Piston kit

A$ 350.00

The turbo pistons are a cast construction piston designed for use in your GTI with forced induction.
Kit includes 4 x Piston and Rings

Turbo Manifold

A$ 895.00

This manifold is designed to take the T25 and T28 and is a great start to putting together the parts you need to turbo your swift

Link Programable Computer(new G3version)

A$ 1,250.00

Fully programable , easy to install , take you performance mods to a new level , this unit will allow you to tune for maximum power , economy and overall performance , we can even put a base program in it to get you started. This ECU will run boost control for turbo charging and has built in data logging function!!!!

Link Computer Controller

A$ 125.00

This unit is used for programing your Link computer.
Select either Hand Held Unit which has a display and can be adjusted anywhere without any other equipment or a serial link to interface you laptop with the Link computer

Cultus Gti Piston and Rings Set

A$ 400.00

These 11.5:1 compression Ratio pistons will make your Gti go real Hard.
Available in .5mm, 1mm & 2mm oversize THESE ARE NOW IN STOCK!!!!!!
Kit includes 4 x Piston , Pin , Circlips and Engine Ring set.
(THESE ARE NOW IN TRANSIT TO US!!

1400cc Cultus Short

A$ 2,250.00

The 1400cc short motor is a direct replacement for the 1500cc upgrade . This is a performance based Hi Compression engine that will give you the power you are looking for in a race bred engine.
Short Motor consits of Block , crank , rods and Pistons , assembled

1.4 Group A Engine

A$ 5,500.00

Well it's about time , a Bigger more powerful engine for you GTI , uses the original 1.3 block , heaps more Power and Torque.This fully reconditioned motor comes with Group A Cams, Vernier Cam Gears and a Flowed Cylinder Head.

Group A Cylinder Head

A$ 1,950.00

This is a race proven unit, port , polish , recut seats & flowed . If anything will give your Gti some punch the Group A head is a must for the performance hungry Gti owner."Head does not include Cams, cam gears, lifters"
GTI ONLY !!

1.3 Group A Engine

A$ 4,500.00

Fully Reconditioned Engine , featuring Group A Camshafts, Vernier Cam Gears, Flowed Cylinder Head . Reco Engine has all newCultus Pistons , Rings , Bearings Gaskets etc.
Engine is fully assembled and ready to go!!!!!!

Close Ratio Gear Set

A$ 5,500.00

This is a must for the motorsport person or the big HP Suzuki's they are 30% stronger than standard and the ratios give even gaps between each gear.
The Gearbox will never be the same!!
3.08(1st),2.29(2nd),1.76(3rd),1.39(4th),1.16(5th)

Crown Wheel and Pinion

A$ 1,495.00

Choose the Diff Ratio you need for your motorsport needs. This are strong and reliable.
Ratio's are open to whatever you want within reason.(4.93:1 being the lowest)
Just tell us what you want!!

LSD DIFF

A$ 995.00

Get a Grip !! , this diff gives you the best of both worlds it works like a disc type LSD in cornering and braking , then secondly works as a locker under hard acceleration exerting equal load to both wheels providing less torque steer than a ordinary diff. ( fits 1989 and on Swifts and GTi's)

ShortThrow Gear Shifter

A$ 295.00

Fully adjustable , Chrome Plated Shaft , Spun Alloy Gear Knob. Adjust the gearshifter selection throw to be as Short as you like . Comes complete with fitting instructions and Allen Key to adjust.
SF Models only 1989 on !!

Front Driveshaft Assy(H.D.)

A$ 250.00

These heavy duty drive shafts are brand new and ready to give you long life under heavy conditions.

CV Joint (H.D.)

A$ 125.00

These CV Joints are made to handle the tuff stuff , fit them and forget them.

Cross Drilled Disc Rotors

A$ 380.00

Not only are these one of the best performance mod's you can do they look great , the centre hub and outer are both finished in an attractive cad gold plating.
SOLD PER PAIR
Front Only Available

Slotted Disc Rotors

A$ 350.00

Slotted Disc Rotors make stopping a breeze .
SOLD PER PAIR

Kevlar Disc Pad Set

A$ 95.00

This disc pads are designed to work well at high temperature which is a must fro motorsports.
Set includes 4 pads

GTI HP Valve Springs

A$ 250.00

Yes they are now in stock , these Spring Give 100LB seat pressure and can handle up to 600 thou lift
Set contains 16 springs

GTi Sports Engine Valves

A$ 495.00

These valves are 1/2 mm oversize in the head , they are fully stainless construction , swirl polished , with a hard chrome stem and hardened tip.
These are sold in a engine set but can be purchased seperately.
Sold in 16 VALVE SET!!

HP Camshaft Set

A$ 995.00

Proven on the street and on the track to be the best Camshaft Combination for this engine , designed for maximum power. These camshafts are hydraulic!!
GTI ONLY!!
These Cams are" NEW BILLETS"

Vernier Cam Gear Set

A$ 395.00

Fully Adjustable Vernier Cam Gear Set , will enable you to extract more HP from your GTi , Race Proven , Strong and reliable.Timing increments are marked on the gears for easy adjustment. Full fitting instructions are included.
GTI ONLY !!

H.P. Conrod Bolts

A$ 195.00

made from 8740 chrome moly , these bolts are a must for anyone who wants to seriously rev the little sucker hard.
Kit includes 8 x rod bolts and nuts , assembly grease and instructions

Top End Gasket Set

A$ 175.00

Australian Made , this gasket set is exactly what we use in our High Performance race engines.
This kit contains , All Top End Gaskets and Seals inc valve Stem Seals.

Master Engine Rebuild Kit

A$ 750.00

This kit contains , complete gasket set , pistons & rings, bigend Bearing , main bearings ,thrust washers , water pump , timing belt and full list of bolt tensions

Hi Performance Bearing Set

A$ 120.00

These bearings are the best performing most durable on the market. Made with Alecular Bi Metal construction these bearings are a must for Hi Performance Apllications . Race Proven!!
Set includes Main Bearings , Conrod Bearings and Thrust Washers

Fuel Pressure Regulator

A$ 295.00

This unit is fully adjustable to suit your requirements, has fitted guage , all hardware to fit , and full fitting instructions.

Computer Chip (Group A)

A$ 150.00

The Suzisport Computer Chip has been vigously tested to be the best off the shelf chip for the Gti that we know of. The chip will give you a 8600rpm rev limiter , something that the little 1300 screamer just eat's up. Easy to fit , comes with circuit board peg for easy removal and refit, plus full fitting instructions. This is some of the cheapest Horsepower you can buy!! Normally $295.00
GTI ONLY!!

Spiralcor Ignition Lead Set

A$ 115.00

If you want the best well here they are , Spiralcor is the best spark plug lead material available.
Get the most out of your Gti .

1.3 to 1.6 Adaptor Kit

A$ 295.00

Fit a 1.6 engine or bottom end to your swift or gti , it is so simple with the adaptor plate .
Kit includes all hardware and fitting instructions

http://www.suzisport.com